Attributes
|
S7506E-X
|
S7508E-X
|
S7510E-X
|
Exchange capacity
|
31.1Tbps/153.6
|
53.1Tbps/205
|
65.7Tbps/256
|
Tbps
|
Tbps
|
Tbps
|
Packet forwarding rate
|
5760Mpps/36000 Mpps
|
7680Mpps/48000 Mpps
|
8400Mpps/72000 Mpps
|
Number of slots
|
9
|
14
|
13
|
Number of service slots
|
6
|
8
|
10
|
Number of slots on the switch stencil
|
1~4
|
Redundant design
|
Master control, switching network board, power supply, fan
|
Master control, switching network board, power supply, fan
|
Master control, switching network board, power supply, fan
|
Layer 2 characteristics
|
Support IEEE 802.1P (CoS priority) Support for IEEE 802.1Q (VLAN) Support IEEE 802.1d (STP) / 802.1w (RSTP) / 802.1s (MSTP) Support IEEE 802.1ad (QinQ), flexible QinQ and Vlan mapping Support IEEE 802.3x (full duplex flow control) and back pressure flow control (half duplex) Support IEEE 802.3ad (link aggregation) and cross-board link aggregation Support IEEE 802.3 (10Base-T) / 802.3u (100Base-T) Support IEEE 802.3z (1000BASE-X) / 802.3ab (1000BaseT) Support IEEE 802.3ae (10Gbase) Support for IEEE 802.3af (PoE) Support IEEE 802.3at (PoE+) Support RRPP (Rapid Ring Protection Protocol) Support for cross-board port/flow mirroring Support port broadcast/multicast/unknown unicast storm suppression Support Jumbo Frame Support VLAN-based partitioning based on port, protocol, subnet, and MAC Support SuperVLAN Support PVLAN Support for Multicast VLAN+ Support point-to-point single VLAN cross-connect, dual VLAN cross-connect All rely on VLAN-ID for forwarding, does not involve MAC address learning Supports the largest VLAN MAPING/flexible QinQ entries. Full support for VLAN MAPPING capabilities Support GVRP Support LLDP
|
IPv4 routing features
|
Support ARP Proxy Support DHCP Relay Support DHCP Server Support static routing Support RIPv1/v2 Support OSPFv2 Support IS-IS Support BGPv4 OSPF/IS-IS/BGP GR ( Graceful Restart graceful restart) Support equal cost routing Support policy routing Support routing strategy
|
IPv6 routing features
|
Support ICMPv6 Support ICMPv6 redirection Support DHCPv6 Support ACLv6 Support OSPFv3 Support RIPng Support BGP4+ Support IS-ISv6 Support manual tunnel Support for ISATAP Support 6to4 tunnel Support for IPv6 and IPv4 dual stacks
|
Multicast
|
Support IGMPv1/v2/v3 Support IGMPv1/v2/v3 Snooping Support IGMP Filter Support IGMP Fast leave Support PIM-SM/PIM-DM/PIM-SSM Support MSDP Support AnyCast-RP Support MLDv2/MLDv2 Snooping Support PIM-SMv6, PIM-DMv6, PIM-SSMv6
|
ACL/QoS
|
Support for standard and extended ACLs Support for VLAN-based ACLs Support for Ingress/Egress ACLs Supports Ingress/Egress CAR with a granularity of up to 8Kbps Support two levels of meter capabilities Supports VLAN aggregation CAR and MAC aggregation CAR function. Support traffic shaping (Traffic Shaping) Support 802.1P/DSCP priority Mark/Remark Support for hierarchical QoS (H-QoS) Support 8 priority queues Support queue scheduling mechanism, including SP, WRR, SP+WRR, CBWFQ Support congestion avoidance mechanisms, including Tail-Drop, WRED Support Mirroring
|
SDN/ OPENFLOW
|
Support OPENFLOW 1.3 standard Support multiple controllers (EQUAL mode, active/standby mode) Support multi-table pipeline Support Group table Support Meter
|
VxLAN
|
Support VXLAN Layer 2 switching
Support VXLAN routing exchange
Support for VXLAN gateways
|
MPLS/VPLS
|
Support for L3 MPLS VPN Support for L2 VPN: VLL (Martini, Kompella) Support MCE Support MPLS OAM Support VPLS, VLL Support for layered VPLS and QinQ+VPLS access Support P/PE function Support LDP protocol
|
Security Mechanism
|
Support EAD security solutions Support Portal authentication Support MAC authentication Support for IEEE 802.1x and IEEE 802.1x SERVER Support AAA/Radius Support HWTACACS and support command line authentication Support SSHv1.5/SSHv2 Support ACL flow filtering mechanism Supports plain text and MD5 cipher text authentication for OSPF, RIPv2, and BGPv4 packets. The command line is protected in a hierarchical manner to prevent unauthorized users from being hacked. Different levels of users have different configuration rights. Telnet login and password mechanism supporting limited IP addresses Supports multiple combinations of IP addresses, VLAN IDs, MAC addresses, and ports. Support uRPF Support primary and backup data backup mechanism Support post-fault alarm and self-recovery Support data log
|
System Management
|
Support FTP, TFTP, Xmodem Support SNMP v1/v2/v3 Support sFlow traffic statistics Support RMON Support NTP clock Support NetStream traffic statistics function Support power intelligent management, support 802.3az energy efficient Ethernet Support device online status monitoring mechanism to detect key components including main engine, backplane, chip and storage Support Telemetry traffic visualization
|
Programmability
|
Support Ansible automation configuration, realize network configuration batch release
|
reliability
|
Support main control board 1+1 redundancy backup Support power 1+1 redundancy backup Passive backplane design All boards support hot swap Support CPU protection technology Support +/-8KV lightning protection Support VRRP Support RPR Support BFD for OSPF, BGP, IS-IS, and Static Route Support for Ethernet OAM (802.1ag and 802.3ah) Support for MAC Tracert Support RRPP Graceful Restart for OSPF/BGP/IS-IS Support DLDP Support VCT Support Smart-Link Support hot patch
|
power supply
|
DC:–48V~–60V
|
AC:100V~290V
|
Dimensions (height x width x depth) (mm)
|
353x440x660
|
620 x440x 660
|
620x440x660
|
8RU
|
14RU
|
14RU
|