|
Forwarding mode
|
Store-forward mode
|
Store-forward mode, cut through mode
|
|
Link aggregation
|
Supports GE port and 10GE port aggregation.
Support static aggregation, dynamic aggregation
|
|
flow control
|
Support IEEE802.3x flow control, support back pressure
|
|
Jumbo Frame
|
stand by
|
|
MAC address table
|
Support black hole MAC address
Supports setting the maximum number of port MAC addresses.
|
|
VLAN
|
Supports VLANs based on ports, protocols, MACs, and IP subnets (4094)
Support QinQ and flexible QinQ
Support for Voice VLAN
|
|
VLAN mapping
|
Support 1:1 VLAN Mapping
Support N:1 VLAN Mapping
Support 2:2 VLAN Mapping
|
|
DHCP
|
Support DHCP Client
Support DHCP Snooping
Support DHCP Relay
Support DHCP Server
Support DHCPv6
|
|
IRF2 intelligent flexible architecture
|
Support IRF2 intelligent flexible architecture
Support distributed device management, distributed link aggregation, distributed elastic routing
Support for stacking via standard 10 Gigabit Ethernet interfaces
Support local stacking and remote stacking
|
|
IPv4 routing
|
Support static routing, RIP, OSPFv2, BGP, ISIS
Support equal cost routing, routing policy, VRRP, policy routing
|
|
IPv6 routing
|
Support static routing, RIPng, OSPFv3, BGP4+ for IPV6, ISISv6
Support equal cost routing, routing policy, VRRP, policy routing
|
|
URPF
|
Support reverse route check
|
|
BFD
|
OSPF, BGP, IS-IS, Static Route, RSVP-TE, VRRP
|
|
Tunnel
|
Supports IPv6 manual tunnels, 6to4 tunnels, ISATAP tunnels, IPv4 over IPv4 tunnels, IPv4 over IPv6 tunnels,IPv6 over IPv6 tunnel, GRE tunnel
|
|
IPv4 multicast
|
Support IGMP Snooping v2/v3
Support IGMP v1/v2/v3
Support PIM-DM/SM/SSM
Support MSDP, MBGP
Support multicast VLAN, multicast VLAN+
Support for multicast policies
|
|
IPv6 multicast
|
Support MLD Snooping v1/v2
Support MLD v1/v2
Support PIM-DM/SM/SSM for IPV6
Support MBGP for IPv6
Support IPv6 multicast VLAN, IPv6 multicast VLAN+
|
|
MPLS VPN (S5800 series)
|
Support MPLS
Support VPLS
Support MCE
|
|
Broadcast/multicast/unicast storm suppression
|
Supports storm suppression based on port rate percentage
Support PPS-based storm suppression
Support kbps-based storm suppression
|
|
MSTP
|
Support STP/RSTP/MSTP protocol
Support STP Root Guard, BPDU Guard
|
|
RRPP
|
Support RRPP protocol and RRPP multi-instance
|
|
Smart link and Monitor link
|
Support Smart Link and Smart Link multi-instance
Support for Monitor link
|
|
QoS/ACL
|
Support L2 (Layer 2) ~ L4 (Layer 4) packet filtering function, providing source MAC address, destination MAC address, source IP (IPv4/IPv6) address, destination IP (IPv4/IPv6) address, port, protocol, VLAN Flow classification
Packet filtering with time range support
Support for large capacity bidirectional ACLs
Limits the rate at which packets are received on the port and the rate at which packets are sent.
Support packet redirection
8 output queues per port
Support flexible queue scheduling algorithm, which can be set based on ports and queues at the same time, supporting SP, WDRR, WFQ, SP+WDRR four modes
Supports 802.1p and DSCP priority re-marking of packets
Support WRED congestion avoidance mechanism
|
|
Mirror
|
Support N:1 port mirroring and flow mirroring
Support multiple mirrored viewing ports
Support port remote mirroring (RSPAN)
Support for remote mirroring of enhanced ports (ERSPAN)
|
|
Safety features
|
Support user hierarchical management and password protection
Support AAA authentication and RADIUS authentication
Supports MAC address authentication, 802.1x authentication, and portal authentication.
Support HWTACACS
Support for SSH 2.0
Support IP+MAC+ port binding
Support for IP Source Guard
Support for HTTPs, SSL
Support PKI (Public Key Infrastructure)
Support EAD
ARP detection can be performed based on DHCP snooping security entries, 802.1x entries, or IP/MAC static binding entries.
DHCP snooping support to prevent fraudulent DHCP servers
Support BPDU guard, Root guard
Supports plain text and MD5 cipher text authentication for OSPF and RIPv2 packets.
|
|
OAA
|
Firewall card
IPS card
Wireless control service board
|
|
Traffic management
|
Support IPFIX (only supported by S5800 series)
Support sFlow
|
|
Loading and upgrading
|
Support XModem protocol, FTP, TFTP to implement load upgrade
|
|
management
|
Supports the configuration of the command line interface (CLI), Telnet, and console port.
Support SNMPv1/v2/v3
Support RMON (Remote Monitoring) alarms, events, history
Support iMC network management system and support WEB network management
Support system logs and hierarchical alarms
Support cluster management HGMPv2
Support power alarm function
Support fan and temperature alarm
Support NTP
|
|
maintain
|
Support Ping, Tracert, NQA, Track
Support Virtual Cable Test, DLDP
Support 802.1ag, support 802.3ah
Support USB for file upload and download
|
